Titanium
|
|
ATI 55, Ti CP-3 (UNS R50550)
Nominal Composition - wt. %
| C |
Fe |
H |
N |
O |
Ti |
| 0.10 max |
0.30 max |
0.015 max |
0.05 max |
0.35 max |
rem |
Mechanical Properties
| Density lb/in3 (g/cm3) |
0.163 (4.51) |
| Metallurgical Condition |
1,300 °F anneal |
| Tensile Strength, ksi (MPa) |
65 (448) |
| 0.2% Yield Strength, ksi (MPa) |
55 (379) |
| Elongation, % |
18 |
| Reduction in Area, % |
30 |
| Typical Hardness |
90 HRB |
|
ATI CP-Series Technical Data Sheet
|
|
|
|
|
| Typical room temperature mechanical properties.
The information, data, and specifications presented here are representative only, and are not guaranteed values. Material or product applications described herein are solely for illustrative purposes and should not be construed as express or limited warranties for fitness for these or other applications.
Data are typical and should not be construed as maximum or minimum values for specification or for final design. Data on any particular piece of material may vary from those shown herein.
|
|
|
