|
Nickel-Base
|
|
ATI 718Plus®
(UNS-N07818)
Composition
| Compound |
C |
Cb |
Cr |
Fe |
Co |
W |
Mo |
Ni |
Al |
Ti |
| nominal wt. % |
0.02 |
5.4 |
18.0 |
10.0 |
9.0 |
1.0 |
2.8 |
rem |
1.5 |
0.7 |
Mechanical Properties
| Density lb/in3
(g/cm3) |
0.298 (8.25) |
| Metallurgical
Condition |
1,750 °F + age |
| Tensile Strength, ksi
(MPa) |
214 (1,474) |
| 0.2% Yield Strength, ksi
(MPa) |
166 (1,144) |
| Elongation, % |
23 |
| Reduction in Area, % |
35 |
| Typical Hardness |
45 HRC |
|
ATI 718Plus Technical Data
Sheet
in PDF Format |
|
|
| |
| Typical room temperature mechanical
properties.
The information, data, and specifications
presented here are representative only, and are not guaranteed
values. Material or product applications described herein are
solely for illustrative purposes and should not be construed
as express or limited warranties for fitness for these or
other applications.
Data are typical and should not be construed
as maximum or minimum values for specification or for final
design. Data on any particular piece of material may vary from
those shown
herein. | | |
